Here are a few builds I've finished up in the last week or two. The 1590A's are more layouts I've done and fabbed boards up for. The one I am most excited about is the FV-1 board. It only holds a single program, but it still really opens up a lot of doors for things to do in the 1590A form factor :) I have already tested out programs for different reverb's, delay's, modulation and cool pitch effects. The program I have loaded on this one is based on a Binson delay for a Gilmour board I am working on.
(https://farm1.staticflickr.com/856/26647938697_55afe48e04_z.jpg)
Rampart - 1590A P19 Muff
(https://farm1.staticflickr.com/897/40624727995_47c48502c2_z.jpg)
Doomsday Device - 1590A IC Big Muff
(https://farm1.staticflickr.com/941/40624727825_670cd849d3_z.jpg)
Death Ray - 1590A Venarum Jan Ray
(https://farm1.staticflickr.com/819/40624727585_91a42707e9_z.jpg)
Razor's Edge - 1590A Mosfet Tube Driver
(https://farm1.staticflickr.com/793/40624727345_937aef734d_z.jpg)
VFE The Scream
(https://farm1.staticflickr.com/888/40721799034_1ec24110bf_z.jpg)
VFE Mobius Strip
(https://farm1.staticflickr.com/898/40721798854_a9123a0567_z.jpg)
VFE The Triplet
(https://farm1.staticflickr.com/878/40541592355_fc3fb6a7db_z.jpg)
VFE Blueprint
(https://farm1.staticflickr.com/794/40624727095_bea727e83d_z.jpg)
Is your FV-1 pedal reprogrammable as fully built, or did you have to pick a final program before soldering it all up?
Quote from: EBK on April 17, 2018, 02:36:36 PM
Is your FV-1 pedal reprogrammable as fully built, or did you have to pick a final program before soldering it all up?
Its reprogrammable. Since the EEPROM is socketed, you can just pull it out, load a new program, put it back and you have a new sound for the pedal.
Quote from: dan.schumaker on April 17, 2018, 02:42:26 PM
Its reprogrammable. Since the EEPROM is socketed, you can just pull it out, load a new program, put it back and you have a new sound for the pedal.
Nice! 8)