Not really a report, just a picture ;D I forgot to take gut shots before i put her together (you don't wanna see that mess anyway ;D)
(http://lh3.ggpht.com/_yFex0loOVcw/TDFJY6duYsI/AAAAAAAAAuY/E5yPBp0L1ts/s800/DSC00483.JPG)
That is pretty darn slick. How'd you do the LED setup? That's fantastic.
That's AMAZING!!! And, yes, how did you do that LED set-up?
thanks guys. The lighting isn't hard a all, just requires a little effort. The epoxy finish was way more frustrating.
http://www.diystompboxes.com/smfforum/index.php?topic=66840.0
Quote from: jimmybjj on July 13, 2010, 07:23:51 PM
thanks guys. The lighting isn't hard a all, just requires a little effort. The epoxy finish was way more frustrating.
http://www.diystompboxes.com/smfforum/index.php?topic=66840.0
That is
slick.
My only question would be what grade sandpaper to use on the LED. What did you use?
Quote from: pauloman80 on July 15, 2010, 06:07:00 PM
Quote from: jimmybjj on July 13, 2010, 07:23:51 PM
thanks guys. The lighting isn't hard a all, just requires a little effort. The epoxy finish was way more frustrating.
http://www.diystompboxes.com/smfforum/index.php?topic=66840.0
That is slick.
My only question would be what grade sandpaper to use on the LED. What did you use?
to be honest I didn't sand the led and it worked great. I'm still a newbie but I didn't know LEDs light was directional, is it?
Quote from: jimmybjj on July 16, 2010, 02:20:19 PM
Quote from: pauloman80 on July 15, 2010, 06:07:00 PM
Quote from: jimmybjj on July 13, 2010, 07:23:51 PM
thanks guys. The lighting isn't hard a all, just requires a little effort. The epoxy finish was way more frustrating.
http://www.diystompboxes.com/smfforum/index.php?topic=66840.0
That is slick.
My only question would be what grade sandpaper to use on the LED. What did you use?
to be honest I didn't sand the led and it worked great. I'm still a newbie but I didn't know LEDs light was directional, is it?
Well, it was suggested in the tutorial you linked to. The LEDs I use definitely shine wayyyy brighter through the rounded top, especially the blue ones. Looks like you got a good result anyway! I'll have to try both ways, see if it makes a difference.
EDIT: BTW, what thickness of Plexi did you get, and where?
That is one cool looking pedal ..10/10 for creativity !
looks great!
in regards to sanding LEDS - those green scotchbrite bads work awesome.
Something I've not been able to ascertain (probably because I'm an idiot) is what part of the LED to sand. The whole thing? It seems equivocal from the tutorial.