I am trying to verify the pinout for the transistors on the Hipster board. If you are looking at the board from the front and the transistors are on the left side. Is the collector on the top or bottom?
This is an easy answer so you need to work just a little to get it.
1- On the schematic, what's the collector of Q1 connected to?
2 - On the image of the PCB traces in the project doc, where is that connection shown on Q1? That's the collector.
Ground? The instructions say the pinpot is CBE. Is that from the top or bottom?
On the PCB it is CBE top to bottom.