Print Page - 3P4T Rotary Switch Schematic

Title: 3P4T Rotary Switch Schematic
Post by: GeorgeFormanGrill on June 10, 2018, 08:31:49 PM

Hey all:

I'm trying to build this Big Cheese clone (schematic attached) and am not 100% sure how to wire the 3PDT rotary switch.

For example, does this schematic mean the poles 8 & 7 are wired together while 6 and 5 are left as is?

Thanks for the help!
George

Title: Re: 3P4T Rotary Switch Schematic
Post by: Govmnt_Lacky on June 10, 2018, 09:02:42 PM

Quote from: GeorgeFormanGrill on June 10, 2018, 08:31:49 PM
Hey all:

I'm trying to build this Big Cheese clone (schematic attached) and am not 100% sure how to wire the 3PDT rotary switch.

For example, does this schematic mean the poles 8 & 7 are wired together while 6 and 5 are left as is?

Thanks for the help!
George

Yes!

The dotted line just means that it is all on one switch. So, according to the schematic:

Poles 7&8 are tied together
Poles 10, 11, and 12 are tied together

Title: Re: 3P4T Rotary Switch Schematic
Post by: GeorgeFormanGrill on June 10, 2018, 09:24:47 PM

Awesome. Thanks!

madbeanpedals::forum

Projects => General Questions => Topic started by: GeorgeFormanGrill on June 10, 2018, 08:31:49 PM