I gave the first (technically the second because I troubleshot the first PCB to death) Collosalus build to a buddy of mine because it sounded so impressive when he played it. He's a killer player and it really needed to be on his board.
I've missed it from time to time and thought I put together another one for me. I've also been fiddling with getting the board size down on the Coda bypass to be able to fit it in a 1590A. I mounted the electros and the relay to the bottom, snug against the stomp switch. I also got rid of the pads and components for the momentary setting to further reduce the footprint.
The knobs are the gold sparkles from BLMS and I think they look kind of cool on the weird green enclosure. I think this was a second from PPP. I should really put this on a scope to get it dialed in but sounds great with a minimum of fuss.
(https://www.gordomusic.com/Madbean/M117-1.jpg)
I hadn't accounted for how close that Kobi output jack is to the trimmer but I made it fit by "extending" the holes down a tad and using slightly larger washers. A nice quiet MXR (though I still miss the Reticon sound) and clickless bypass...what's not to love??? I'll hang on to this one.
(https://www.gordomusic.com/Madbean/M117-2.jpg)
Very tidy work and excellent fit! Super pedal!
Looks nice! What did you use for bypass?
Looking very nice!
I used the Coda (from Etcher's Paradise) but drew up a smaller layout and left off the momentary function.