Text only | Text with Images

madbeanpedals::forum

General => Open Discussion => Topic started by: claytushaywood on April 07, 2019, 08:23:42 PM

Title: Help identifying potentiometer and where to purchase? Nobels ODR1
Post by: claytushaywood on April 07, 2019, 08:23:42 PM
I found an old Nobels that needs a new volume pot- It has a strange potentiometer in it- and neither 9mm or the 16mm are gonna work well.  Can anyone tell me where to get a pot that will work well here- the stock ones have a plastic D shaft thats a good bit longer than the 9mm pots and they dont need a nut.  The picture ive attached shows a standard 9mm pc mount that I tried to use on top- the bottom pot is the one I'm trying to find one similar to in 50kA.

Thanks!
Title: Re: Looking for Pot to repair Nobels ODR-1
Post by: alanp on April 07, 2019, 10:12:24 PM
https://shop.befaco.org/165-potentiometers (https://shop.befaco.org/165-potentiometers)

They look like the kind of pot that Befaco like to use.
Title: Re: Looking for Pot to repair Nobels ODR-1
Post by: claytushaywood on April 08, 2019, 10:25:47 PM
Quote from: alanp on April 07, 2019, 10:12:24 PM
https://shop.befaco.org/165-potentiometers (https://shop.befaco.org/165-potentiometers)

They look like the kind of pot that Befaco like to use.

Maybe a little bit- except the lack of nut and plastic shaft and d shaft.  aand befaco doesnt have anything close to 50kA.

Anyone got any other ideas?
Text only | Text with Images