Print Page - Pork Barrel Volume loss

Title: Pork Barrel Volume loss
Post by: ferdinandstrat on February 02, 2020, 05:53:26 PM

So I built the Pork Barrel and it sounds exquisite...except for the fact that theres a decrease in volume everytime it is engaged. I tried replacing R11 with a 100K trimmer but to no avail. Any help with this?

Title: Re: Pork Barrel Volume loss
Post by: jimilee on February 02, 2020, 10:43:57 PM

Have you double checked all of your component and reflowed?

Sent from my iPhone using Tapatalk

Title: Re: Pork Barrel Volume loss
Post by: ferdinandstrat on February 03, 2020, 04:55:17 AM

No, But from what I understand most choruses have this issue

Title: Re: Pork Barrel Volume loss
Post by: Scruffie on February 03, 2020, 11:54:56 AM

R11 isn't the place to do it, that's part of a low pass network, you'll mess with the filtering and evidently, it doesn't audibly produce enough gain.

You'll have to play with the mix network, have some breakfast math http://www.geofex.com/Article_Folders/panner.pdf

Title: Re: Pork Barrel Volume loss
Post by: ferdinandstrat on February 03, 2020, 01:08:05 PM

So by this method, I have to reduce the value or R9 and R26, Right? Less resistance = more output?

madbeanpedals::forum

Projects => Tech Help - Projects Page => Topic started by: ferdinandstrat on February 02, 2020, 05:53:26 PM