Print Page - retrograde works, but has a hum active and bypsaa

Title: retrograde works, but has a hum active and bypsaa
Post by: mikef on March 20, 2020, 11:14:45 PM

Hello,
Well, got the fuzz, got the octave..and some hum....any suggestions?!? bypass or active,btw.

Title: Re: retrograde works, but has a hum active and bypsaa
Post by: mikef on March 20, 2020, 11:15:15 PM

and.................

Title: Re: retrograde works, but has a hum active and bypsaa
Post by: mikef on March 20, 2020, 11:15:47 PM

face

Title: Re: retrograde works, but has a hum active and bypsaa
Post by: jimilee on March 21, 2020, 12:14:19 AM

First, I swear that looks like it says 2619 and second, is it like a ground him or 60 cycle him?

Sent from my iPhone using Tapatalk

Title: Re: retrograde works, but has a hum active and bypsaa
Post by: mikef on March 21, 2020, 11:25:27 AM

HUM............... (pun intended.)I will hook it up later this morning and take a listen........THANKS~ it is 2619 :o Might be on Beans double secret PCB list?

Title: Re: retrograde works, but has a hum active and bypsaa
Post by: mikef on March 21, 2020, 01:44:30 PM

switched between bench power supply and 9v battery. 9volt was considerably less hum,whereas the bench power supply was off the chart loud.

Title: Re: retrograde works, but has a hum active and bypsaa
Post by: jimilee on March 21, 2020, 08:16:30 PM

Is your off board wiring hooked up properly, can't see it in the photos. Is the transformer oriented correctly?

Sent from my iPhone using Tapatalk

Title: Re: retrograde works, but has a hum active and bypsaa
Post by: mikef on March 21, 2020, 11:20:37 PM

here it is. Thank you for the help. I am flummoxed!

Title: Re: retrograde works, but has a hum active and bypsaa
Post by: mikef on March 21, 2020, 11:21:47 PM

Flummoxed, I say!

Title: Re: retrograde works, but has a hum active and bypsaa
Post by: jimilee on March 22, 2020, 08:25:27 PM

It looks to me like the jacks are wired backwards.

Sent from my iPhone using Tapatalk

Title: Re: retrograde works, but has a hum active and bypsaa
Post by: mikef on March 22, 2020, 10:25:53 PM

lol! Man, I would not be surprised..........lemmy swap 'em and see!

Title: Re: retrograde works, but has a hum active and bypsaa
Post by: mikef on March 22, 2020, 10:44:15 PM

YEP! Thanks brother.

Title: Re: retrograde works, but has a hum active and bypsaa
Post by: jimilee on March 23, 2020, 12:30:33 AM

Quote from: mikef on March 22, 2020, 10:44:15 PM
YEP! Thanks brother.

You betcha, enjoy!

Sent from my iPhone using Tapatalk

madbeanpedals::forum

Projects => General Questions => Topic started by: mikef on March 20, 2020, 11:14:45 PM