Hi,
Can somebody tell me where in the PCB must I solder the on/off/on switch ? Thank you!
Ariosto
At the top of the PCB you'll see three large holes in a row b/w the 1n film cap and the 4 electrolytics. Solder it directly to the PCB. You can kinda see it in my build pic in the doc, too.
Quote from: madbean on October 18, 2020, 10:44:27 PM
At the top of the PCB you'll see three large holes in a row b/w the 1n film cap and the 4 electrolytics. Solder it directly to the PCB. You can kinda see it in my build pic in the doc, too.
...... You mean, between the three electrolytic caps and the 1nf cap?
Quote from: Ariosto on October 18, 2020, 10:47:19 PM
Quote from: madbean on October 18, 2020, 10:44:27 PM
At the top of the PCB you'll see three large holes in a row b/w the 1n film cap and the 4 electrolytics. Solder it directly to the PCB. You can kinda see it in my build pic in the doc, too.
...... You mean, between the three electrolytic caps and the 1nf cap?
Sorry, stupid question. It´s too late here (Germany) I must go to sleep........... Thanks a lot for your help!!!
Quote from: Ariosto on October 18, 2020, 11:00:17 PM
Quote from: Ariosto on October 18, 2020, 10:47:19 PM
Quote from: madbean on October 18, 2020, 10:44:27 PM
At the top of the PCB you'll see three large holes in a row b/w the 1n film cap and the 4 electrolytics. Solder it directly to the PCB. You can kinda see it in my build pic in the doc, too.
...... You mean, between the three electrolytic caps and the 1nf cap?
Sorry, stupid question. It´s too late here (Germany) I must go to sleep........... Thanks a lot for your help!!!
No worries. It's easy to overlook. It is a rather busy little PCB.