Hi guys!
I'm building my first 2 projects, the Expandora and the Turnabout and both projects need a 1n cap that looks like the picture attached. I can't find this cap anywhere. Do you know any alternative for it?
Thanks a lot!
You can use any 1n cap that fits in that space. The 100 is the max voltage tolerance but anything above a 16v tolerance is fine. For box caps they typically come in 63v or 100v tolerances.
Thanks for the quick reply Madbean.
Would be ok one of these?
https://www.mouser.es/ProductDetail/KEMET/MMK5102J100J01L4BULK?qs=IKDMbYZLynBDiE6%252BV602cg%3D%3D
https://www.mouser.es/ProductDetail/KEMET/SMR5102K100J01L4BULK?qs=9OvERMBOKbYh9yLW7hTkLw%3D%3D
Thanks again.
Yes, either one will work
Make sure leads have 5mm spacing between them
Thanks again madbean!
I'm with the pots now and not sure if I have to pick linear, audio or reverse audio type, and also whats the difference between 100kC, 100kB, 100kA.
Sorry, so many questions...
Many thanks!
Quote from: thevorticist on November 17, 2020, 05:58:26 PM
I'm with the pots now and not sure if I have to pick linear, audio or reverse audio type, and also whats the difference between 100kC, 100kB, 100kA.
100kC = 100K ohms Reverse Audio
100kB = 100K ohms Linear
100kA = 100K ohms Audio
Thank you!!
I promise to send pictures and maybe some video link with the results!!