Hello, I ve just purschase some Madbean PCB ( Electric Mistress, Memory Man, Rat and Big Muff )
I m just asking question about finishing the paint job with some bomb.
First a primer, second the color and to finish varnish.
Is that correct ?
Yessir, you got it.
Sent from my iPhone using Tapatalk
I'm sure there are other things out there that would work well too but I'll just throw this out there.
I've had pretty good luck using this as a primer / base coat:
https://www.rustoleum.com/product-catalog/consumer-brands/professional/aluminum-primer-spray (https://www.rustoleum.com/product-catalog/consumer-brands/professional/aluminum-primer-spray)
There are some spray paints that claim to be paint & primer in one but this stuff is formulated specifically for use on aluminum.
I just make sure the enclosures are super clean before getting started and they usually turn out pretty good.
Check out the build reports page, tons of ideas to be had.
Sent from my iPhone using Tapatalk
Thanks for posting the aluminum primer link. I'll have to check it out/.