Hi All,
Just wanted to share my build of the up down daddy pedal from Delykpcb. It was a very challenging build and I'm very grateful it worked first time. I used 1/8 W resistors but still had to stand them up. The pedal sounds great and octaves track very well.
(https://uploads.tapatalk-cdn.com/20210426/7c81536b9d5e2636720de623fed49072.jpg)
(https://uploads.tapatalk-cdn.com/20210426/671ce19ed883ca89efea27720c6a292c.jpg)
(https://uploads.tapatalk-cdn.com/20210426/00b29c0a566727d7ae39c48315d49323.jpg)
(https://uploads.tapatalk-cdn.com/20210426/94c32098ab911cab5eba8ba4e579a29a.jpg)
Great pedal. It's nice to someone else build one too.
Sent from my iPhone using Tapatalk
Quote from: jimilee on April 26, 2021, 12:43:54 PM
Great pedal. It's nice to someone else build one too.
Sent from my iPhone using Tapatalk
Thanks Jimi, I saw you post on this pedal as well during my build, the pictures helped me with ensuring the components were the right way around!
That is a tight build, looks way harder than the Madbean lowrider I did. Great Job!
Great build! So is this the small as 125B version of Lowrider with chips on both sides or what is it derived from?
Quote from: cooder on April 27, 2021, 01:15:56 AM
Great build! So is this the small as 125B version of Lowrider with chips on both sides or what is it derived from?
I believe the Pearl Octaver that the lowrider is based on but I wanna say its a 1590b!
nice one! surely not an easy pedal to build!
I can say it was an easy build because it fired up the first time! I would hate to have had to troubleshoot this guy, it's right and complicated. I had some issues post build where the sound was cutting out and intermittent, I had a lucky guess and swapped out the two germanium diodes, some dodgy D9e I had, and replaced with BAT46 diodes. Now it's working well and no issues, just an FYI for anyone who attempts this build. This fits into a 1590B but I had this trapezium shaped enclosure, a bit more room on top.