I swapped out the 1M distortion pot for a 50k. There was just too much dead space up until the end. I used 1n34a diodes which typically have to be pushed hard to get any break up and still have volume. I found some mods, I probably won't do them though. The knobs cam from small bear.
(https://uploads.tapatalk-cdn.com/20210427/3f21828111a9e991f5702d9bcf827d9e.jpg)
(https://uploads.tapatalk-cdn.com/20210427/a25fa95612ed92834635db9884546e16.jpg)
Sent from my iPhone using Tapatalk
Hats off sir! Looks really great, did you check out the wampler mods? I used some of his in a 250 builds and they really brought the pedal alive, at least gave it some added level
Quote from: jjjimi84 on April 27, 2021, 06:21:32 PM
Hats off sir! Looks really great, did you check out the wampler mods? I used some of his in a 250 builds and they really brought the pedal alive, at least gave it some added level
I didn't. I checked them out though. If I ever build another one, I will. Any mods just about make it a dod 250. I had a song kicking around in my head and this particular song fit the bill.
Sent from my iPhone using Tapatalk
You really need a C/Reverse taper for those. The 1m works great then.
Quote from: Willybomb on April 28, 2021, 08:59:31 AM
You really need a C/Reverse taper for those. The 1m works great then.
There was too much dead space on the 1M. I tried everything from a 1M and worked backwards landing at 50k. I could've done some other mods to fix that, but I didn't.
Sent from my iPhone using Tapatalk