Just resurfacing this from a mods thread that might be getting lost: https://www.madbeanpedals.com/forum/index.php?topic=14898.0
I'm working on bringing an old muff back to life and would like to add a permanent mids boost mod. Referring to the image below, can I just put a 10nf cap on C10 to achieve this? Can I just solder the legs of a 10nf cap to the legs of the 3.9nf that is there? Or is there another way I want to go about this?
Thanks in advance!
(http://i.imgur.com/WzaQHlz.png)
Hi, paralell connecting of capacitors will add up their values. So, one left in PCB, and second add with normal switch. See pictures I attached. That resistor 1M8 (or similar huge value) just avoids click too much, but you don't need to use it.
Thanks Zerro! So, it seems like I should be fine just adding a 10n to the legs of the 3n9. I'd rather not put another switch in here as the pedal already has a lot going on (blend and diode switch)-- and i think I'll only be playing it with the mid-boost.
Suit yourself ;@)