Text only | Text with Images

madbeanpedals::forum

Projects => General Questions => Topic started by: pewtershmit on August 03, 2010, 08:50:55 PM

Title: Zygote
Post by: pewtershmit on August 03, 2010, 08:50:55 PM
Hi guys,

Can I make a BC108 Fuzz Face from the Zygote? I'm pretty positive their fairly the same. Just thought I'd ask.

Also, Who sells BC108's for FF circuits?
Title: Re: Zygote
Post by: madbean on August 03, 2010, 10:18:23 PM
Yep. Just reverse the orientation of the electrolytic caps and be sure use a negative ground wiring.
Title: Re: Zygote
Post by: pewtershmit on August 03, 2010, 11:44:12 PM
excellent
Title: Re: Zygote
Post by: pewtershmit on August 27, 2010, 06:21:25 AM
back again! got my boards in so I'm finally at this. Does the D1 need to be reversed as well as the caps? which wiring diagram can I use to wire this as a negative ground effect?
Title: Re: Zygote
Post by: madbean on September 03, 2010, 11:08:59 AM
Yep, you need to reverse the protection diode. You can follow any of the negative ground projects for wiring...like the Serendipity or Neutrino.
Title: Re: Zygote
Post by: brainbender on January 29, 2011, 09:46:21 AM
This is what i was looking for! Thanks! ;)
Text only | Text with Images