Print Page - eagle claw

Title: eagle claw
Post by: brako on April 13, 2022, 07:07:45 AM

hi everybody,

can somone help me please?

i've make a bad soldier on the diode D5. the pcb is damage.

And the mistake is that i don't find the D5 on the shematic.. Where is it please in the circuit?

thanks

Title: Re: eagle claw
Post by: fig on April 13, 2022, 12:38:35 PM

If you are speaking of the PCBGM Eagle Claw, there is no D5, per the build docs.

https://pcbguitarmania.com/wp-content/uploads/2019/08/Eagle-Claw-Building-Docs.pdf

Hope you get it sorted.

Title: Re: eagle claw
Post by: brako on April 13, 2022, 12:52:09 PM

hey thanks,

it's the eagle claw octave fuzz v1.1 by parasit studio.
I've the build but on the shematic it don't look

Title: Re: eagle claw
Post by: fig on April 13, 2022, 01:00:07 PM

I see it on the image...but not in the schematic. It's a rectifier diode...

Title: Re: eagle claw
Post by: brako on April 13, 2022, 01:19:19 PM

yes this one, but it don't appear on the shematic

Title: Re: eagle claw
Post by: madbean on April 13, 2022, 01:55:02 PM

D5 is a 1N4001 so it may be for polarity protection. Probably you should post this in the Parasit Studio section of the forum:
https://www.madbeanpedals.com/forum/index.php?board=86.0

madbeanpedals::forum

Projects => General Questions => Topic started by: brako on April 13, 2022, 07:07:45 AM