Text only | Text with Images

madbeanpedals::forum

Projects => Tech Help - Projects Page => Topic started by: in8241 on May 29, 2022, 07:35:09 AM

Title: Aquaboy DLX Optocoupler Sub
Post by: in8241 on May 29, 2022, 07:35:09 AM
Would an xvive VTL5C3 work with the Aquaboy DLX? Having trouble sourcing 9203 LDRs.
Title: Re: Aquaboy DLX Optocoupler Sub
Post by: Thewintersoldier on May 29, 2022, 12:59:32 PM
Yeah, the aquaboy deluxe 2015 used the vlt5c3. Make sure it fits if it's on the new layout as that board wasn't designed with the vactrol in mind.
Title: Re: Aquaboy DLX Optocoupler Sub
Post by: in8241 on May 29, 2022, 06:40:01 PM
pcb says 2019, document calls for led + 9302. Looking at spec sheets VTL5C3 looks close to 9203, and it might be tight on the board, I'll order one and see if I can fit it in.

TY
Title: Re: Aquaboy DLX Optocoupler Sub
Post by: Bio77 on May 29, 2022, 07:14:32 PM
Jameco has the 9203s.  Might be worth ordering a few, they get used in other projects.
Title: Re: Aquaboy DLX Optocoupler Sub
Post by: madbean on May 29, 2022, 08:34:23 PM
The 9203 is suggested, but even the generic Tayda ones may work fine here. It's not exactly precision modulation.
Title: Re: Aquaboy DLX Optocoupler Sub
Post by: in8241 on August 14, 2022, 04:30:12 AM
I ended up buying a dozen 9203's from jameco, works great in the circuit, theres build pics in the build section
Text only | Text with Images