Everything works but the gain knob. Volume adjusts the volume, tone adjusts the tone, the gain pot does nothing.
Anyone have any ideas as to why?
Name of the circuit = TS8 (oh) 8
https://rullywow.com/wp-content/uploads/2022/07/TS8oh8-v2.pdf
No modifications to the circuit and no parts substitutions.
Q1
C = 8.43
B = 3.54
E =3.14
Q2
C= 8.43
B= 3.54
E= 3.14
IC1
1= 4.20
2= 4.20
3= 4.20
4= 0
5= 4.20
6= 4.22
7=4.20
8= 8.43
This smells like a bad connection issue. Suggest you use the DMM to check connections in the Drive portion of the circuit (everything coming off of Pins 6 & 7 of IC1)
My guess is that you will find a bad solder joint or bad/broken connection/trace. Also check your resistor and cap values are correct.
Good Luck ;D
Gotta have pictures of both sides. Close up and clearly lit.
Sent from my iPhone using Tapatalk