Print Page - another dumb Degenerator component question which might have an obvious answer

Title: another dumb Degenerator component question which might have an obvious answer
Post by: jessenator on January 22, 2023, 01:02:46 AM

So I'm nearly ready to assemble my Degenerator (in a PLA enclosure for now), and now I'm wondering about my J201, having had reservations on a part earlier today.

This is the part I bought from DigiKey https://www.digikey.com/en/products/detail/linear-integrated-systems-inc/J201-TO-92-3L-ROHS/14312366

I didn't look at the thing until today, but this is what's printed on the back. Is that a printing artefact, or did they shop me the wrong part?
(https://i.imgur.com/fEJ1ZBi.jpg)
J20F doesn't give me much besides car parts, so I thought I'd get a sanity check for this one.

thanks

Title: Re: another dumb Degenerator component question which might have an obvious answer
Post by: jessenator on January 22, 2023, 03:00:23 AM

Okay I'm done being a worrywart about it all. got it all fired up and it works

Can't say the same for the first PT2399 I chucked in there. It must've bricked itself when the first Magdelay Bay I sent out got fried somehow... oh well.

Title: Re: another dumb Degenerator component question which might have an obvious answer
Post by: jimilee on January 22, 2023, 03:27:19 AM

Nice job man!

Sent from my iPhone using Tapatalk

madbeanpedals::forum

Projects => General Questions => Topic started by: jessenator on January 22, 2023, 01:02:46 AM