Print Page - 3 knob, 2 footswitch pedal enclosure

Title: 3 knob, 2 footswitch pedal enclosure
Post by: ckim715 on January 13, 2012, 02:01:30 AM

I have one of these just sitting around. Help me decide what I should build...I have no idea, really :-\

Title: Re: 3 knob, 2 footswitch pedal enclosure
Post by: jtn191 on January 13, 2012, 02:12:10 AM

a few ideas:

If you like Big Muffs

A Fuzz Munchkin-alike: http://www.tymguitars.com.au/?page_id=620#fuzzmunch
Your favorite BMP, but the second footswitch toggles between the volume pot and a fixed resistor so that engaging it equals max volume

A delay which uses the "crazy oscillation" footswitch

A boost + OD, Dist, or Fuzz

Your favorite dirt pedal circuit, and then you use the second footswitch to toggle between two modded settings, switching between three components

Title: Re: 3 knob, 2 footswitch pedal enclosure
Post by: jkokura on January 13, 2012, 04:12:06 AM

You could also use a pot like this: http://www.smallbearelec.com/Detail.bok?no=1213 (http://www.smallbearelec.com/Detail.bok?no=1213)

Then you could have two different gain pots for an overdrive of some sort, and you could switch between the gain pots. The EGO is a good candidate for this, as is a green bean.

Jacob

Title: Re: 3 knob, 2 footswitch pedal enclosure
Post by: ckim715 on January 13, 2012, 07:12:39 AM

The dual gang pot idea is brilliant!

So...I also have an extra wah enclosure...what do you think? Volume pedal? wait for the univibe? hmm..

Title: Re: 3 knob, 2 footswitch pedal enclosure
Post by: jtn191 on January 13, 2012, 11:34:31 AM

...I've been looking for a wah enclosure for the upcoming weener wah!!!

Title: Re: 3 knob, 2 footswitch pedal enclosure
Post by: sam_c on January 13, 2012, 11:36:15 AM

I finished my wolfshirt (fuzz/octave) last night and ive put a footswitch in for the octave.

madbeanpedals::forum

General => Open Discussion => Topic started by: ckim715 on January 13, 2012, 02:01:30 AM