Print Page - double delay layouts

Title: double delay layouts
Post by: lloyd17 on January 31, 2012, 08:31:16 AM

well I'm sick of getting hosed on 3005 chips so its time for the 4x3008 hack on my dirtbag. Trouble is smallbear has a double sided layout. Anyone know of a single sided layout or even better a vero? Figured I'd ask before trying my own. Thanks!

Title: Re: double delay layouts
Post by: marmaliser on January 31, 2012, 08:41:59 AM

Some info here I think http://wiki.freestompboxes.org/viewtopic.php?f=13&t=8376

Title: Re: double delay layouts
Post by: gtr2 on January 31, 2012, 12:54:50 PM

I've got a few fabbed boards that are verified based off of that schematic. PM me

Title: Re: double delay layouts
Post by: Chi_Boy on February 02, 2012, 03:36:22 AM

Quote from: lloyd17 on January 31, 2012, 08:31:16 AM
Trouble is smallbear has a double sided layout.

SmallBear has these boards?? Where might they be? I looked but can't seem to find them.

Title: Re: double delay layouts
Post by: lloyd17 on February 02, 2012, 04:23:04 AM

No boards, just layouts on their fake 3005 page

Title: Re: double delay layouts
Post by: jkokura on February 02, 2012, 04:26:29 AM

If Josh's boards run out, I can make up a public layout unless he's willing to share.

Jacob

Title: Re: double delay layouts
Post by: cjkbug on February 05, 2012, 02:19:33 AM

there is a perfboard layout on the smallbear site. I'm trying to make a doulble sided etch tomorrow. radio shack sells double clad board. I beefed up the traces on the sb artwork and added register marks to align each side. I don't think it will be too difficult. I guess I'll find out pretty soon.

madbeanpedals::forum

Projects => General Questions => Topic started by: lloyd17 on January 31, 2012, 08:31:16 AM