madbeanpedals::forum

Projects => General Questions => Topic started by: midwayfair on March 06, 2012, 07:35:19 PM

Title: Enclosure just *slightly* larger/taller than 1590A?
Post by: midwayfair on March 06, 2012, 07:35:19 PM
I'm trying to fit a red llama into a small enclosure, but the 1590A seems to be just a hair too shallow to fit a jack over top of the board. I *think* the enclosure that an Xotic EP Booster is in is taller than a 1590A and that would fit the bill, but I can't find one like that. The only other thing I've seen around this size is the 1090NS, which is even smaller than the 1590A.
Title: Re: Enclosure just *slightly* larger/taller than 1590A?
Post by: jkokura on March 06, 2012, 08:15:01 PM
The 1090NS is supposed to be identical to the 1590A, it's just built by New Sensor not Hammond...

There's a good thread around here for how to fit everything into a 1590A sized enclosure. Do some searching and you should find it.

Jacob