Text only | Text with Images

madbeanpedals::forum

General => Open Discussion => Topic started by: ckim715 on March 19, 2012, 10:21:13 PM

Title: Don't know where to post this (Smoothie Related)
Post by: ckim715 on March 19, 2012, 10:21:13 PM
So I'm already thinking ahead, and I want to do the univibe mods to the Smoothie (phase 45). I guess my question is, madbean, is the smoothie going to be a direct clone of the P45, and am I going to be able to do the univibe cap mods to the circuit? (Not going into a 1590A if I go through with these mods)
Thanks
Title: Re: Don't know where to post this (Smoothie Related)
Post by: madbean on March 19, 2012, 10:38:00 PM
It's 100% Phase 45. I have not tried cap mods with a Phase45 but there is no reason you cannot do this. What is the mod---replacing the two 10n caps with a 220n and 470pF? Or similar?
Title: Re: Don't know where to post this (Smoothie Related)
Post by: ckim715 on March 20, 2012, 12:00:49 AM
Here's a schem of what I am trying to do.
(http://www.lynx.bc.ca/~jc/phase45modded.gif)
I'm not sure if I want to do the bias mod, but I am for sure doing the cap mod.
Title: Re: Don't know where to post this (Smoothie Related)
Post by: madbean on March 20, 2012, 12:06:05 AM
Yeah that seems easy enough. You should be able to do all those mods with a Smoothie.
Title: Re: Don't know where to post this (Smoothie Related)
Post by: ckim715 on March 20, 2012, 12:30:56 AM
Cool. Thanks, Brian.
Text only | Text with Images