Print Page - A>B, B>A switch for a double overdrive pedal

Title: A>B, B>A switch for a double overdrive pedal
Post by: GermanCdn on March 23, 2012, 02:11:36 PM

So, in the midst of my March madness build (a ridiculous number of pedal builds in a month), and I'm going to be putting a Glitterati and a Quasar into one box (save pedal board space). What I would like to do is install a pedal orientation toggle switch which would allow me to assign which circuit is the first in the signal chain, the same as the A>B, B>A switch in my AC+. Does anyone have a schematic on how to do this? I'm guessing I need either a 3PDT toggle or a on Z on toggle, but I am likely totally wrong there. Any help is always appreciated. Will post pics of the builds when I am done.

Thanks,

Curtis

Title: Re: A>B, B>A switch for a double overdrive pedal
Post by: plesur on March 23, 2012, 02:22:18 PM

Have a look here:
http://www.madbeanpedals.com/forum/index.php?topic=3805.0;topicseen

Title: Re: A>B, B>A switch for a double overdrive pedal
Post by: GermanCdn on March 23, 2012, 02:26:30 PM

Perfect, thanks, and +1 on the sticky comment. Off to the mancave for hours of drilling and soldering.....

Title: Re: A>B, B>A switch for a double overdrive pedal
Post by: madbean on March 23, 2012, 02:58:26 PM

I actually have little PCB to use either a 3PDT or 4PDT (with LEDs) designed for order switching, FYI. It won't be available this time around, but if there is enough interest it's something I could do next time for cheap.

madbeanpedals::forum

Projects => Tech Help - Projects Page => Topic started by: GermanCdn on March 23, 2012, 02:11:36 PM