Can't find a small 1u cap for C10 at a reasonable price as it is the single component i miss.
Can i use a tantalum instead?
And if it's the case how should i orient the polarity? Reading the schematic i would guess :
+ pole connected to the PT2399, meaning left negative, right positive when looking at the pcb.
Brian?
You sure can. Negative towards the output.
Josh
Thanks!
Quote from: gtr2 on April 07, 2012, 12:26:10 AM
You sure can. Negative towards the output.
Josh
By the way, i finished your sea urchin board and tested it on my testing rig 10 minutes ago. Works great. Thanks!
Tayda has nice, small 1uf non-polarized caps at a reasonable price:
http://www.taydaelectronics.com/capacitors/monolithic-ceramic-capacitor/1uf-50v-multilayer-ceramic-capacitor.html
Quote from: culturejam on April 07, 2012, 01:02:57 AM
Tayda has nice, small 1uf non-polarized caps at a reasonable price:
http://www.taydaelectronics.com/capacitors/monolithic-ceramic-capacitor/1uf-50v-multilayer-ceramic-capacitor.html
+1
Quote from: djaaz on April 07, 2012, 12:39:41 AM
By the way, i finished your sea urchin board and tested it on my testing rig 10 minutes ago. Works great. Thanks!
Great!
Quote from: culturejam on April 07, 2012, 01:02:57 AM
Tayda has nice, small 1uf non-polarized caps at a reasonable price:
http://www.taydaelectronics.com/capacitors/monolithic-ceramic-capacitor/1uf-50v-multilayer-ceramic-capacitor.html
Thanks for the link, will stock that with my next order.