Hi
Assuming Ive used all the right parts, what could be a reason for a mudbunny build (etched from the available layout, v2 I think) what could cause it to be just acting like a distortion, than the full on muffy fuzzy hugeness thats to be expected?
I used the creamy dreamer specs, and 2n5088 trans from a batch that have worked fine elsewhere, but admittedly I havent tested them.
Ian
Incorrectly oriented transistors. Derp!
Feel free to delete (or keep to highlight my incompetence!)
lol, we've all been there :)
strange one this actually
I put Q1 - 3 in the correct way round (emitters to ground, in this case via jumpers)
However, if I orientate Q4 are the schematic, it sounds awful. If I spin it 180, it sounds close to a Creamy dreamer I built on vero. Very confused now.
Can try bc549c I think I have some...
same deal with the BC549...color me confused.
My Mayo and Violet ramshead biulds are only getting sound through q 1-2, and 3-4 arent doing anything. Neither are the Diodes It just sounds mid volume and isnt doing anything. I am confused too, how did you orient the trannys?
mine was fine up til q4, I just ended up rotating it 180 degrees. It sounded pretty nice. The Q4 I think is just acting as some kinda buffer to recover lost volume due to the passive tone stack (citation needed) so not really changing the sound.
I gave the pedal away so I cant post voltages now :(