First off.... I did not pick the name of this pedal :) And apologies to any who may be offended. The person that I built this for picked the name, I found that graphic on some website for a bowling league in Colorado :)
I did the pcb layout myself using the schematics that Devi has posted on FSB and her forum. I'll work on a build doc and throw it in the members projects if people are interested. The way I did the PCB was that I gave each circuit (Torn's Peaker and Soda Meiser), it's own power and grounds, but spaced the board mounted pots so that you could etch one board to build it like I have it here, or just one circuit independently in it's own box.
One little quirk that I wasn't able to fix was that when the "Tear" control of the Torn's Peaker is at either extreme, it feedbacks like a banshee when you stop playing. Just move the pot a little in either direction from the extreme and its fine.
I powder coated the box in my favorite color, Columbia Coatings Dormant Sparkle Copper, and the decal was done in Inkscape and printed on waterslides.
Here's some pics.
(http://i792.photobucket.com/albums/yy207/irmcdermott/photo3.jpg)
(http://i792.photobucket.com/albums/yy207/irmcdermott/photo5.jpg)
(http://i792.photobucket.com/albums/yy207/irmcdermott/photo1.jpg)
Nice. Love that colour and you could see that logo on a shirt at the bowling alley for sure. lol
Would love a build doc, one sided etch print if possible. Thanks and congrats
niceness. I seem to remember a fix for the TP problem. It was something like a 1k resistor across 2 lugs of the pot, or a 1k from a lug to ground.
I like this! It's pretty cool that some builders will put their schems out there for folks to see. I tend to like the crazy fuzzes so this is up my alley.