Gudday all.
I've got it in my head to re-house a Behringer GDI-21 and make the Tweed/Brit/Calif and Clean/HighG/Hot footwitchable. As these settings are set from a 3way switch each I want to drop the Tweed and Clean from the options and use a stomp to go between each of these.
My issue is thus:
The switches used look identical to these ones:
http://parts.digikey.com/1/parts/973952-switch-slide-dp3t-pc-mnt-l-2mm-eg2305a.html
and the pinout is with 7 and 3 being common.
5 1
6 2
7 3
8 4
The positions are:
1 - 1 and 3, 5 and 7
2 - 6 and 7, 2 and 3
3 - 7 and 8, 3 and 4
Presuming Position 1 is Calif, and Position 2 is Brit, how would I go about replacing this switch with a stomp? I presume I can leave Position 3 disconnected... I suppose I need to know what those pins are actually connected to on each pole...