this is my slowloris...
[img=http://s1.postimage.org/aLzrr.jpg] (http://postimage.org/image/lu6eip38/)
[img=http://s1.postimage.org/aLBWA.jpg] (http://postimage.org/image/lu8221l0/)
i have a problem with my slowloris...switch pop when i use switch cliping diode...
anyone can help me?
sory for my bad english....thx
(http://www.freeimagehosting.net/uploads/5478cc7aaa.jpg) (http://www.freeimagehosting.net/)
(http://www.freeimagehosting.net/uploads/0c3d743b6b.jpg) (http://www.freeimagehosting.net/)
Hnky....
You don't need to apologize for your english every post! We know it's not your first language, it's ok - we're getting you!
However, I don't know why your switch is popping. Can you give us some more details?
Jacob
thx jacob....
when I tried to change from led to the diode clipping from the switch.....audible sound like a...."duk"...
That isn't too surprising, actually. I think that popping comes from the difference is forward voltage from the different diode types. If you switched them back and forth a half-dozen times it might go away. If it really bothers you, put a 1n cap in parallel with the LED's (signal to ground). That might stop it.
thanks madbean...so its normally......???i will try put a 1n cap in parallel with the LED's.....
thanks for your help....