Text only | Text with Images

madbeanpedals::forum

Projects => General Questions => Topic started by: DutchMF on June 10, 2012, 08:24:26 AM

Title: Another LT1054 question (Collosalus related)
Post by: DutchMF on June 10, 2012, 08:24:26 AM
Hey guys, would one LT1054 be able to supply enough current for both a Collosalus and a Porkbarrel? I'll be building a Collosalus soon, and as it will be sitting next to the Porkbarrel on my pedalboard, it might be worth it to make a +15V output.

Paul
Title: Re: Another LT1054 question (Collosalus related)
Post by: jkokura on June 10, 2012, 01:54:09 PM
Probably.

Jacob
Title: Re: Another LT1054 question (Collosalus related)
Post by: DutchMF on June 12, 2012, 07:10:25 PM
Bump

Anyone else has an opinion on this, or even better, some experience? I'd hate to ruin an enclosure with a hole I don't need.....
Title: Re: Another LT1054 question (Collosalus related)
Post by: pickdropper on June 12, 2012, 07:38:12 PM
Well, if you are going to build both circuits regardless, I would measure the actual current draw after they are built, but before they are boxed.  That would give you a good idea of what you need.
Title: Re: Another LT1054 question (Collosalus related)
Post by: DutchMF on June 12, 2012, 08:24:41 PM
Thanx, should have thought about that myself.......  ::)
Text only | Text with Images