Text only | Text with Images

madbeanpedals::forum

General => Open Discussion => Topic started by: Guybrush on June 27, 2012, 06:41:30 PM

Title: Unlabelled Component holes ROG May Queen
Post by: Guybrush on June 27, 2012, 06:41:30 PM
I'm just organising my ever growing list of future builds and came across the Run Off Groove May Queen pedal.  It looks simple enough to build but I was just wondering what the unlabelled holes on the PCB are for?  I've seen them on other PCBs but never thought to ask.

(http://img836.imageshack.us/img836/1330/queenmay.jpg)a

Thanks.
Title: Re: Unlabelled Component holes ROG May Queen
Post by: jkokura on June 27, 2012, 06:47:42 PM
If you look at the layout, those holes connect to other holes that are labeled: GND.

Jacob
Title: Re: Unlabelled Component holes ROG May Queen
Post by: plesur on June 27, 2012, 06:52:29 PM
You can never have enough GND points.  :D

The other holes next to the caps are for using caps with different lead spacing.
Title: Re: Unlabelled Component holes ROG May Queen
Post by: Guybrush on June 27, 2012, 08:32:49 PM
I thought it would be a ground thing but the spare holes next to the caps threw me a bit.  Thanks guys.  If you follow the standard wiring diagram is there any need to wire up extra ground points?
Text only | Text with Images