Print Page - BassMudbunny Big Muff Pi

Title: BassMudbunny Big Muff Pi
Post by: icecycle66 on July 05, 2012, 04:48:08 PM

So, eh..

Which of the Mudbunny models start off most similar to the current EHX Bass Big Muff Pi?
http://www.ehx.com/products/bass-big-muff-pi

Don't go making a hard thing of this, just if you happen to have already looked into it and know the answer.

Thanks.

Title: Re: BassMudbunny Big Muff Pi
Post by: Vintageman on July 11, 2012, 08:15:38 PM

I´ve read several times that the most similar is the green russian.

Weeks ago I tried to trace the bass big muff´s schematic from some pictures. And I almost finished.

I couldn´t trace the booster section (bad pictures). But I traced the typical big muff section.

There are some strange caps in paralell with unknown values (values not shown in the PCB), and I don´t know what clipping diodes are used, but I´m posting my work, maybe it could be helpful....

http://s1199.photobucket.com/albums/aa477/vintage_man/PLAQUETEANDO/?action=view&current=bassbigmuffincomplete.jpg

http://s1199.photobucket.com/albums/aa477/vintage_man/PLAQUETEANDO/?action=view&current=trazandolaplaca.jpg

madbeanpedals::forum

Projects => Tech Help - Projects Page => Topic started by: icecycle66 on July 05, 2012, 04:48:08 PM