Print Page - Drill template for Zombii for "B" size box

Title: Drill template for Zombii for "B" size box
Post by: Beedoola on July 09, 2012, 04:30:38 AM

anyone happen to have a drill template for a Small Bear "B" "z vex" sized box? Thanks.

Title: Re: Drill template for Zombii for "B" size box
Post by: Haberdasher on July 09, 2012, 04:46:41 AM

Here's one that someone posted a long time ago. If it is the one I'm thinking of it should be printed at 300dpi.

I should add that I haven't used this and can't vouch that it's a lock. Also note that this is probably meant for 9mm pots and likely wouldn't work for 16mm ones.

Title: Re: Drill template for Zombii for "B" size box
Post by: Beedoola on July 09, 2012, 04:56:47 AM

thanks el duderino! I actually ordered the 9mm pots from Smalll Bear so it should be a go. I'll print it out and see if it lines up with the enclosure when it gets there. Thanks again!

madbeanpedals::forum

Projects => General Questions => Requests => Topic started by: Beedoola on July 09, 2012, 04:30:38 AM