Print Page - Firebomb BOM R1 and R10??

Title: Firebomb BOM R1 and R10??
Post by: bigrigg on July 22, 2012, 02:04:33 AM

Hello, on the single side etch version there are R1 and R10 in the circuit board diagram yet not on the BOM.
They are resistors on the signal input along with the first capacitor.
Should they be omitted as I don't see them in the schematic for slambox or firebomb.
Please advise. Thanks

Title: Re: Firebomb BOM R1 and R10??
Post by: madbean on July 22, 2012, 02:27:09 AM

Those spots are for 1M pulldowns (leftover from the previous version). You should not need to use them

Title: Re: Firebomb BOM R1 and R10??
Post by: bigrigg on July 22, 2012, 02:58:34 AM

Thank you very much!!

madbeanpedals::forum

Projects => Tech Help - Projects Page => Topic started by: bigrigg on July 22, 2012, 02:04:33 AM