Print Page - Runt: Ruetz Mod?

Title: Runt: Ruetz Mod?
Post by: skullservant on July 31, 2012, 01:22:23 AM

So I bought a Runt thinking I was going to make a simple RAT. Well then I started thinking of more and more mods, and now I want to add the Ruetz. I know that it involves one of the 47 ohm resistors, and I'm almost positive its R4, but I just wanted to check before I soldered everything in

Thanks guys!

Title: Re: Runt: Ruetz Mod?
Post by: mgwhit on July 31, 2012, 01:58:03 AM

Yeah. Compare the Sweep control on the Slow Loris. I'd wire a B1K pot directly off of R4 and then wire C6 off-board directly off of lug 3 to the back of the pot (assuming your enclosure is grounded). Good luck!

Title: Re: Runt: Ruetz Mod?
Post by: skullservant on July 31, 2012, 02:19:08 AM

Thanks for the info :D

Going to get everything wired up now!

madbeanpedals::forum

Projects => General Questions => Mods => Topic started by: skullservant on July 31, 2012, 01:22:23 AM