Really happy that i got a hook on one of these boards, a really cool OD, need to spend more time with it but i like what i hear so far. My first JFET overdrive :)
What ya do when you don't have PCB mounted pots........you do some! :)
(http://sphotos-e.ak.fbcdn.net/hphotos-ak-snc7/s720x720/408875_370628569679106_458206023_n.jpg)
Having alot of fun with my new letter punch! 8)
Looks like Fairfield circuitery...but i don't care...
(http://sphotos-c.ak.fbcdn.net/hphotos-ak-ash3/550410_370628593012437_1759827552_n.jpg)
(http://sphotos-a.ak.fbcdn.net/hphotos-ak-ash4/307898_370628609679102_1967193093_n.jpg)
(http://sphotos-g.ak.fbcdn.net/hphotos-ak-ash3/548716_370628623012434_410917064_n.jpg)
(http://sphotos-h.ak.fbcdn.net/hphotos-ak-ash4/304448_370628656345764_470750796_n.jpg)
(http://sphotos-b.ak.fbcdn.net/hphotos-ak-snc6/269065_370628686345761_1962417732_n.jpg)
Quote from: GrindCustoms on September 22, 2012, 05:39:58 AM
What ya do when you don't have PCB mounted pots........you do some! :)
Been doing the "home-made PCB pot" trick as well, works really well!! Nice build man.
Paul
Good stuff!
Perhaps bigger knobs will cover the pot holes?
Very Fairfield!
Nice going! I just used some home made mounted pots for my kingslayer the other day. It's a nice trick.
Thanks guys, i have to say that i picked up the home made pcb mounted pot trick here, while looking at build reports ;)
Quote from: MattOcaster on September 22, 2012, 03:52:08 PM
Good stuff!
Perhaps bigger knobs will cover the pot holes?
Very Fairfield!
I tried bigger knobs like standard davies and boss style with a skirt but they where too big too fit the spacing.
But.........., i kind of like that look, it's raw........i love raw stuff, i tried some aluminum knobs i had...but only had 3, going to upgrade the knobs on this one......The aluminum knobs with all the bare edges made by the holes and sanding gave a really nice «industrial» look, to me.
Thanks!
Rej