madbeanpedals::forum

Projects => Build Reports => Topic started by: bigrigg on September 27, 2012, 12:34:56 AM

Title: Match Maker (non madbean mixer/splitter)
Post by: bigrigg on September 27, 2012, 12:34:56 AM
The Match Maker....excellent utility pedal for blending 2 effects or softening the blow of something over the top etc.  Add a little clean into your fuzz sound etc.  Tons of uses.

Fully CCW is completely Dry original signal.  Fully CW is completely Wet Send/Return signal.  Noon is a perfect blend of 50/50.  Switch is for inverting phase. No tone suck, quiet and lots of blend range.

(http://i892.photobucket.com/albums/ac124/digthebigrigg/MatchMaker.jpg)

(http://i892.photobucket.com/albums/ac124/digthebigrigg/MatchMakerGutshot.jpg)
Title: Re: Match Maker (non madbean mixer/splitter)
Post by: LaceSensor on September 27, 2012, 12:42:25 AM
Scematic or layout appreciated. Fine build
Title: Re: Match Maker (non madbean mixer/splitter)
Post by: stecykmi on September 27, 2012, 05:41:49 AM
very useful build! especially for bassists.
Title: Re: Match Maker (non madbean mixer/splitter)
Post by: njkke on September 27, 2012, 08:05:03 AM
Quote from: LaceSensor on September 27, 2012, 12:42:25 AM
Scematic or layout appreciated. Fine build
+1!
I was looking for a Blend with phase inverter... This seems to be a good one
Title: Re: Match Maker (non madbean mixer/splitter)
Post by: bigrigg on September 27, 2012, 03:29:16 PM
Hey there,  here is the link for the vero board design.  Thanks for the comments. Enjoy.
http://www.sabrotone.com/wp-content/uploads/2012/08/SplitterMixer.gif
Title: Re: Match Maker (non madbean mixer/splitter)
Post by: eldanko on September 27, 2012, 03:35:48 PM
YES to blend with phase invert.  Beautiful.
Title: Re: Match Maker (non madbean mixer/splitter)
Post by: Om_Audio on September 30, 2012, 07:39:03 PM
Thanks for the layout!
C