Print Page - Klone using lt1054 charge pump

Title: Klone using lt1054 charge pump
Post by: LaceSensor on November 03, 2012, 03:29:49 PM

Hi

Anyone built a lone using the lt1054 ic?
See my thread here. I want to know it this is the problem...

http://www.madbeanpedals.com/forum/index.php?topic=6827.0

Thanks

Ls

Title: Re: Klone using lt1054 charge pump
Post by: the3secondrule on November 03, 2012, 08:11:52 PM

Hi Lace,

I've used LT1054 for all of my Klone (4 or 5?) builds with no problems. I usually just fold pin 1 up and out of the way.

I might be able to get you some voltages later today if that will help - although I AM home alone with a 1 year old, so no guarantees ;D

Title: Re: Klone using lt1054 charge pump
Post by: LaceSensor on November 03, 2012, 08:48:58 PM

Good enough,to know that pin1 and all is cool.

Did you build a chimaera At all?

Title: Re: Klone using lt1054 charge pump
Post by: the3secondrule on November 04, 2012, 12:36:40 AM

Yup, built a chimaera with the LT1054, worked a treat...

madbeanpedals::forum

Projects => Tech Help - Projects Page => Topic started by: LaceSensor on November 03, 2012, 03:29:49 PM