Hey i was just curious if there is a way to leave out the wah part of the circuit so i can just use the sequencer part. If so what parts can i omit. any help would be much appreciated. My schematic reading skills are only okay at best. Thanks, mike
you can basically leave out everything based around Q1 (in the upper-left side of the schematic). if you want the "output" of the sequencer to be a voltage, use the output of R25. If you want the "output" to be a resistance, keep the vactrol.
good luck, this project is notoriously tricky.
Thanks that helps a lot. I figured I would just mess around with it and see if it would work. I saw a thread about a dig dug 2 but I'm not sure if that will be a project or not.