Print Page - Kingslayer opamp question.

Title: Kingslayer opamp question.
Post by: Stig on November 22, 2012, 07:35:25 PM

Hi guys.

Im about to make an order from mammoth to get the parts for the kingslayer.

My question is if I can use the TL074CN instead of the TL074? They dont have any of the other suggested op amps and this was as colse i could get from mammoth. It seems as if the TL074CN is an JFET op amp.

Here´s a link to the TL074CN:
http://www.mammothelectronics.com/MC1496P-Balanced-Modulator-Demodulator-p/400-1053.htm

Thanks for your help.

Title: Re: Kingslayer opamp question.
Post by: midwayfair on November 22, 2012, 08:16:43 PM

The CN just describes certain characteristics of the op amp like heat tolerance and such. It's not relevant for anything in a stomp box.

All the TL0xx op amps are JFET.

Title: Re: Kingslayer opamp question.
Post by: Stig on November 22, 2012, 08:35:55 PM

Hi Jon.

Thanks for your help.

Will order the parts and get this one together.

I have never heard a Klon or clone in real life. There's so much talk about it, really exited to try it out.

madbeanpedals::forum

Projects => General Questions => Topic started by: Stig on November 22, 2012, 07:35:25 PM