Print Page - 125B dimensions

Title: 125B dimensions
Post by: DutchMF on January 13, 2013, 07:05:14 PM

Hey guys,

I've got a 125B enclosure on the way to try out, can anybody tell me what the dimensions are? I've checked out both the Mammoth and PPP websites, and they both state different values. A dimensional drawing like the ones Hammond has on their site would be fantastic! I can't even figure out who makes the things....

Paul

Title: Re: 125B dimensions
Post by: icecycle66 on January 13, 2013, 07:13:07 PM

Internal is
62mm x 112mm x 33mm

Title: Re: 125B dimensions
Post by: RobA on January 15, 2013, 03:21:42 PM

I was just looking for sources of 125B's yesterday I saw a couple of different numbers stated for the dimensions too. I'm pretty sure this is the same box as the one that Mammoth sells.

https://www.4siteelectronics.com/v/vspfiles/assets/images/4s125b.pdf

And, the Hammond 1590N1 is pretty much the same size to within a millimeter so this drawing is close match,

http://www.hammondmfg.com/pdf/1590N1.pdf

It looks like the differences in dimensions are mainly down to wall thickness between the 125B and the 1590N1.

Title: Re: 125B dimensions
Post by: DutchMF on January 15, 2013, 04:27:29 PM

Thanks dudes!

Title: Re: 125B dimensions
Post by: jeffaroo on January 16, 2013, 04:06:58 AM

http://www.pedalpartsplus.com/mm5/merchant.mvc?Screen=PROD&Store_Code=PPP&Product_Code=1400

madbeanpedals::forum

General => Open Discussion => Topic started by: DutchMF on January 13, 2013, 07:05:14 PM