Print Page - Low Profile Stereo Jacks

Title: Low Profile Stereo Jacks - TRS?
Post by: hagcel on February 16, 2013, 10:57:53 PM

Hey,

I'm working on boxing up a ZPD but I can't seem to find any info on the the low profile jacks, which is T, R, S? They are numbered 1, 2, 3...

Google isn't turning anything up.

Thanks!

Title: Re: Low Profile Stereo Jacks - TRS?
Post by: hammerheadmusicman on February 16, 2013, 11:15:06 PM

i can't remember off hand, but get brian's 'baby board build guide' you can see the numbers on his in one of the pics, and i worked it out from there..

good luck!

George

Title: Re: Low Profile Stereo Jacks - TRS?
Post by: midwayfair on February 17, 2013, 04:31:00 AM

Lay the jack on its side with the lugs facing away from you and the hole to the right. The top lug on the left is the tip.

Title: Re: Low Profile Stereo Jacks - TRS?
Post by: hagcel on February 17, 2013, 04:37:08 AM

Ah ok.

I got it to work. I had to ground both the input and output jacks to get any signal to pass and ground the board to the enclosure to get rid of some hum and clock noise from the mod section but now it's dead quiet and sounds great!

madbeanpedals::forum

Projects => Tech Help - Projects Page => Topic started by: hagcel on February 16, 2013, 10:57:53 PM