Print Page - Heat gun recommendations.

Title: Heat gun recommendations.
Post by: RobA on February 20, 2013, 08:32:00 PM

I need to get a heat gun for shrink tubing. Any suggestions?

Title: Re: Re: Heat gun recommendations.
Post by: jimilee on February 20, 2013, 09:20:32 PM

Side of my soldering iron works really well.

Title: Re: Heat gun recommendations.
Post by: RobA on February 20, 2013, 09:28:33 PM

That's actually what I've been doing. I figured I needed a new toy.

Title: Re: Heat gun recommendations.
Post by: AllenM on February 20, 2013, 10:12:50 PM

I use this guy I picked up from Fry's for about $15

http://www.frys.com/product/6471212?site=sr:SEARCH:MAIN_RSLT_PG

AllenM

Title: Re: Heat gun recommendations.
Post by: RobA on February 20, 2013, 11:50:49 PM

Looks good. Now if I only had a Fry's near me, or any other electronics store for that matter.

I have seen something similar on Amazon. I'll have to track it down again. Thanks for the pointer.

Title: Re: Heat gun recommendations.
Post by: Haberdasher on February 20, 2013, 11:57:58 PM

I use a $10 cheapo from harbor freight. No complaints, you just have to be careful with the high heat setting. It will strip paint.

madbeanpedals::forum

General => Open Discussion => Topic started by: RobA on February 20, 2013, 08:32:00 PM