Print Page - Galego Decimator help

Title: Galego Decimator help
Post by: jimilee on March 30, 2013, 08:32:19 PM

Just completed my build, and I gave a question. Does anyone know the proper way to bias this board?

Title: Re: Galego Decimator help
Post by: kryoz on March 30, 2013, 11:29:51 PM

The trim is just to get the same volume with the effect on or bypass, so it´s pretty easy, move the trim until you get the same amount of volume on both status.

Hernan.

Title: Re: Re: Galego Decimator help
Post by: jimilee on March 30, 2013, 11:42:17 PM

The intefbal trimmer? Where does the outside knob need to be during this? All he way down?

Title: Re: Galego Decimator help
Post by: Hangingmonkey on March 31, 2013, 02:15:12 AM

I had the same query about a yr ago...

http://www.madbeanpedals.com/forum/index.php?topic=5453.msg48102#msg48102

Title: Re: Galego Decimator help
Post by: jimilee on March 31, 2013, 02:25:37 AM

Quote from: Hangingmonkey on March 31, 2013, 02:15:12 AM
I had the same query about a yr ago...

http://www.madbeanpedals.com/forum/index.php?topic=5453.msg48102#msg48102

That's about what I was thinking,but following the rock it before you box it,I wanted to make sure. It works,so now I guess I need to box it before I bias it. I'm gonna run over the solders with my magnifying glass before I box it though,this was a tough (er) build,lots of small traces. You know the worse part,ever since I replaces all my boss pedals with customs,I really don't have as much noticeable noise except with dirt pedals now. When I started this project I still had several boss pedals on my board. ;D

madbeanpedals::forum

Projects => Tech Help - Projects Page => Topic started by: jimilee on March 30, 2013, 08:32:19 PM