Hi everyone,
I'm building one of the mini-muff boards (http://www.madbeanpedals.com/forum/index.php?topic=8115.0) to 71 triangle specs.
I want to use the mids pot but don't see a pot value in the build doc. What's the appropriate value here?
Thanks!
Quote from: octa805 on April 07, 2013, 12:29:47 AM
Hi everyone,
I'm building one of the mini-muff boards (http://www.madbeanpedals.com/forum/index.php?topic=8115.0) to 71 triangle specs.
I want to use the mids pot but don't see a pot value in the build doc. What's the appropriate value here?
Thanks!
The most common value for the mid pot seems to be 25kB. When I made my first Violet Ram's Head on the 1st gen Mudbunny board, I didn't find that the midpot did much with the stock values. After a bit of research, I change the following components and it worked much better:
R18 39k --> 1k5
R19 39k --> 47k
C10 4nF --> 22nF
C11 10nF --> 5.6nF
I would try it stock first to see how it works for you. If it doesn't have enough effect, you may want to try some of the above changes.