Hi Guys
after a week or two of using the pedals the pot nuts are loose!
i´m using pots from tayda.
When i finish the build i give to all the nuts a nice grip but after a week... they are loose!
If i force it to much the washer star to push the graphics/decalc
Tips?
i'd maybe try a lock washer on the inside of your box.
from inside? so by that you are saying that the cause of this maybe some gradual movement from the pot?
Weird, I've not had that problem. Think they're getting hot and cooling down causing this? Loc tite!
Well u said its disturbing ur graphic on the outside....so i thought if u put a lock washer on the inside that would remedy the problem......thats what i'd try
iap! it happens on my two last builds!
maybe the clearcoat is to thin... because when i give it a really strong fit the sticker starts to ripple around!
I would suggest more clear coat, and more time to harden before you put your hardware on if the decal is creasing..
How loud are you playing? :D
Quote from: gordo on April 08, 2013, 12:09:54 AM
How loud are you playing? :D
You're supposed to melt faces, not the decal!
I play as loud as they let me hehe
Yess I pointing to clear coat. I have to try not spray but something else...
that bunching up of the decal when you tighten thing up, generally happens to me when the clear coat is too thin, or perhaps you used something that is too soft even when it's set.
George
I give 4 coats of spray polish on this last builds
The two first ones I give it much more..
I used to have the same provlem with the decal bunching up if i tighten up too soon before the clear sets.
I use holtz clear laquer, 1 thin and 2-3 heavy coats, leave dry for 48 hrs and i an tighten the pots just fine.
Every time I see this post, I see pot and nut washer and think yes please.
Quote from: jimilee on April 08, 2013, 03:10:49 PM
Every time I see this post, I see pot and nut washer and think yes please.
^ ;D