Text only | Text with Images

madbeanpedals::forum

Projects => Tech Help - Projects Page => Topic started by: REPTAR on April 12, 2013, 04:11:39 PM

Title: How to wire kingslayer/supreaux 2in1
Post by: REPTAR on April 12, 2013, 04:11:39 PM
I'm about to build a kingslayer/ supreaux 2in1 pedal.  The supreaux runs on 18v, and the kingslayer has an onboard charge pump to accomplish this.  So.. can I wire the power for the supreaux to the 18v output on the kingslayer board?  Or should I build a separate charge pump board for the supreaux? Thanks.
Title: Re: How to wire kingslayer/supreaux 2in1
Post by: midwayfair on April 12, 2013, 04:29:00 PM
You should be okay.
Title: Re: How to wire kingslayer/supreaux 2in1
Post by: REPTAR on April 12, 2013, 04:46:34 PM
Awesome, thanks
Title: Re: How to wire kingslayer/supreaux 2in1
Post by: thesameage on August 13, 2014, 04:33:16 AM
Where exactly is the 18V output of the kingslayer? I'm thinking of doing something similar.
Text only | Text with Images