Hello.:) First Madbean build and things are going smooth.;) Hey I am on one hangup. I have the newest version of the board and I am a bit confused to some of the lug wiring to the PCB. 1A lug in question and a couple of others. Can someone show a completed pic of their build showing the wiring. Sorry if this has been discussed. I did a quick search and could not find any. A lot of the pics were for the old board. Thanks so much in advance!
For footswitch wiring, the standard diagram is what I use: http://www.madbeanpedals.com/tutorials/downloads/StandardWiring_MBP.pdf
Let me know if you need any more help.
Quote from: madbean on April 13, 2013, 07:49:12 PM
For footswitch wiring, the standard diagram is what I use: http://www.madbeanpedals.com/tutorials/downloads/StandardWiring_MBP.pdf
Let me know if you need any more help.
Thanks so much for the reply! I will go over this and see where I went wrong. The LED came on but does not go off...:D Thanks again and I will report back one way or the other.:)
Also... If not using the 2nd clipping mod. Do you leave the holes on the PCB open or do you have to jumper them? Thanks!
Got it! Thanks so much:)