Projects => Tech Help - Projects Page => Topic started by: octa805 on April 19, 2013, 04:34:35 AM
Title: Nautilus sweep pot value
Post by: octa805 on April 19, 2013, 04:34:35 AM
Ok to use B10k instead of B5k?
Thanks!
Title: Re: Nautilus sweep pot value
Post by: stecykmi on April 19, 2013, 11:24:38 PM
it won't hurt anything, but if you find the results unsuitable, you can put a 5k resistor across lugs 1 and 3 to approximate a 5k pot (a 4.7k resistor is close enough).
Title: Re: Nautilus sweep pot value
Post by: octa805 on April 19, 2013, 11:33:29 PM