Mammoth build using the Madbean's Sabretooth etchable pcb
Really nice sound fuzz, tested both with guitar and bass
Front View
(http://img4.imageshack.us/img4/9803/vade.jpg) (http://imageshack.us/photo/my-images/4/vade.jpg/)
Inside View
(http://img109.imageshack.us/img109/3087/lbz9.jpg) (http://imageshack.us/photo/my-images/109/lbz9.jpg/)
Trinity Feedbacker build using my personal layout (here's the thread: http://www.madbeanpedals.com/forum/index.php?topic=8392.0 )
I've found that the Tone pot wiring is inverted (1, 2, 3 in place of 3, 2, 1...)
I've jumpered the 39k resistor and used a 10K B pot for the Mids... it seems much more usable!
Front View
(http://img607.imageshack.us/img607/3935/oyt8.jpg) (http://imageshack.us/photo/my-images/607/oyt8.jpg/)
Inside View
(http://img20.imageshack.us/img20/475/w3hn.jpg) (http://imageshack.us/photo/my-images/20/w3hn.jpg/)
The Gathering
(http://img41.imageshack.us/img41/2751/d9yw.jpg) (http://imageshack.us/photo/my-images/41/d9yw.jpg/)
Man, those are beautiful inside and out!
Big Muff with only two trannies or am I going blind?
Nah, I'm pretty sure there's four... but the low contrast makes it pretty hard to see 2-3 of them.
Tight layout, too.
Also, those both look fantastic. Well done.
Quote from: LaceSensor on June 25, 2013, 10:42:55 PM
Big Muff with only two trannies or am I going blind?
I was thinking the same thing.. I do not see them either.. I wonder...
I really like the graphics on these. Great job.
Yeah, a bit of zooming in and squinting shows them, the black transistor cases just don't show up well against capacitor shadows and naturally dark PCB tracks.
4 transistors as usual! ;D
I've drawn this pcb layout to fit easily inside a 1590A (leaving space for the jacks too)...
so in a 125A there's plenty of room!
You can find my etchable layout in the link, if you wanna build a little (really little) monster... I suggest you to do the Feedback mod... it's crazy but really playable!